The reason why the soldering iron head is not tinned and the way to deal with it
The reason why the soldering iron head is not on the tin has many factors, there are the following situations may lead to not on the tin:

1, uneven plating, affecting heat conduction

2、Soldering temperature is low

3, the end of the welding work is not on the new tin for protection, plating oxides affect the next tin

4, the use of poor-quality materials produced by the soldering iron tip will also affect the tin

Corresponding treatment is as follows:

1、Improve the consistency of the plating

2、If conditions permit, increase the soldering temperature

3、After the soldering operation, put new tin to prevent oxidation.

4、Use high purity, fast heat conduction material.

Questions and Answer

View all
How Much If I buy one Soldering Iron Cost?

How Much If I buy one Soldering Iron Cost?

Adminquecoo
There is an unwritten set of practices you need to adhere to when using iPhone repair tools.So,in order to ensure that you are properly able to fix...
What do I need to keep in mind when using these cell phone repair tools?

What do I need to keep in mind when using these cell phone repair tools?

Adminquecoo
  There is an unwritten set of practices you need to adhere to when using iPhone repair tools.So,in order to ensure that you are properly able to f...
What microcontroller is used in the QUICKO T12 soldering iron that fits the Milwaukee?

What microcontroller is used in the QUICKO T12 soldering iron that fits the Milwaukee?

Adminquecoo
The T12 soldering iron adapted to Milwaukee uses the following microcontrollers: STC15F2K60S2 : T12 soldering iron control board based on STC15F2K6...
Why your T12 soldering iron can't melt old solder?

Why your T12 soldering iron can't melt old solder?

Adminquecoo
7 Reasons You may not be Able to Melt Old Solder with Your T12  Soldering Iron
Are T12 soldering tips good?

Are T12 soldering tips good?

Adminquecoo
There are many reasons why T12 welding nozzles have a reputation for superior performance:  T12 Welding Tip:The T12 is the universal standard for w...
Why is the T12 soldering station for STM32 better than the T12 soldering station for STC?

Why is the T12 soldering station for STM32 better than the T12 soldering station for STC?

Adminquecoo
The T12 soldering station of STM32 exhibits better performance and reliability in multiple aspects compared to the T12 soldering station of STC. Th...